UniversalMounts ST-40 SLIM TILT LCD/LED Mount 26" to 40" (ST40)

Universal Super Flush, Adjustable Tilt LED and LCD mount

Super Slim / Flush,  Adjustable self positioning Tilt  LCD TV, LED TV Wall mount.

UniversalMounts universal Tilt  St-40 wall mounts will work with most  LCD and LED TV screens from 26" to 40".  The super Flush Tilt design is easy to install and remove.

All necessary hardware is included for different wall types. Horizontal and vertical position adjustments allow perfect positioning of the screen regardless of the distance of wall studs.Unit is already assmebled.

3 Easy Steps: Just install  wall plate on the wall,  connect the arms to back of the TV and hang the TV on the wall plate.

  KEY FEATURES:

• (most other Tilt Mounts are 2.5" to 3" from the wall)Your screen will be only 1.65" from the wall
• Adjustable Easy Tilt provides 0° to +12° angle of viewing
• Fits most  26", 32", 37", 40" LCD  & LED screens
• Supports up to 100 lbs
• Solid heavy-gauge steel construction
• Wide open Back Plate for all wire  installations
  
• Easy to install with  23" back plate to support up to 2 studs  
• TV can slide left to right on the 23"  back plate, allowing you to center the TV on the wall  up to 7" (on most 32")
• Supports Vesa 500x300, 400x300, 300x300, 300x200, 200x200 hole patterns
  
• Hole patterns and dimensions
  Plate size                  H : 23" (585 mm)
  Arms size                  V : 15" (380 mm)

Compatibility: This universal wall-mount bracket is designed to fit flat-panel LCD and LED screens from 26" to 40". The TV can have a maximum weight of 100 pounds.

Does not support Samsung 40" LED.

Construction: The bracket is constructed of heavy-gauge steel.

Mounting: The wall plate must be anchored directly to wall studs using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16"  on center. Once the wall plate is anchored to the wall studs and the TV rails (with the TV attached) are hooked onto the wall plate, the TV can slide left to right, allowing you to center the TV on the wall. After the TV is secured, it will be held approximately 1.65" from the wall.

TV Hole patterns Supported:

Horizontal 4" to 20.5"    100---530 mm

Vertical 4" to 13.5"        100---345 mm

WHAT’S IN THE PRODUCT’S BOX?

• 23" wide Back Wall plate
• 2 Tilt TV rails, 15" long each 
• All necessary Screws for Wood Stud installation
• Screws for back of the TV
  
• Manual

UniversalMounts ST-40 SLIM TILT LCD / LED Mount 26" to 40" (ST40)